Get the Damage Report for weekly deals and giveaways.
Your shopping cart is empty!
Both the Dissipator Sleeve and 3 Slot Brake are precision machined in the USA from 4140 Steel with a..
BCG Rebuild/Maintenance Kit for AR15 5.56/.223 Includes:Firing Pin, Chrome plated or Electroless Nic..
The Damage Industries Carbine-length quad rail is a Mil-Standard 1913 profile drop-in rail that repl..
M4 Marked Assembled UpperPrecision Machined from Certified & Tested 7075 T6 Aluminum Forgi..
M4 Marked Stripped UpperPrecision Machined from Certified & Tested 7075 T6 Aluminum Forgin..
M4 Marked Stripped Upper, AR15 PlatformPrecision Machined to Military Standards From Tested & Ce..
BCG Rebuild/Maintenance Kit for AR15 5.56/.223 Includes:Firing Pin, chrome plated Firing Pin Re..
Made for use with M-LOK compatible Hand Guards and Forends Aluminum Add-on Rail Secti..
"In this world everyone is a harbinger." -Ralph Emerson
Tired of eating concussion from your sweet ..
Low profile gas block weighs less than 2.0 oz Clamps tightly
to .750 diameter barrels. Protrusion ..
Nickel Teflon KitAR15 5.56/.223 Kit Includes:1- Cam Pin1- Selector Detent1- Bolt Catch Plunger2- Tak..
Carbine Length Gas TubeBlack oxide finish. Includes roll pin. Made in USA..
Kit Includes:Forward AssistPinSpringMade in USA...
Billet Steel, Shot Peened, Machined to Mil-specBlack OxideMade in USA..
7075 T6 Aluminum ForgingHardcoat AnodizedMade in USA...
Precision machined in Indiana, USA from steel billet with MIL-DTL-16232. Skeletonized with a black o..
Kit includes: Ejection Port Cover Door, Pin, Spring & C-clipMade in USA..
4PC ECS Rail Cover Kit* Snap-on, snap-off installation/removal yet incredibly secure mounting* Sure-..
AR15 Standard Charging Handle6061 Aluminum ForgingHardcoat AnodizedMade in USA...
Gas Tube for Mid-Length Gas SystemsChoice of Stainless Steel or Black Oxide finish. Includes roll pi..
Made in USA1 Delta Slip Ring Spring1 Delta Snap Ring (C-clip)1 Bolt Catch Plunger1 Bolt Catch Pin1 F..
Stainless steel or Black Oxide finish. Includes roll pin. Made in USA..
For Standard Carbine Length Gas SystemsStainless Steel finishIncludes roll pin. Made in USA..
Gas Tube, Pistol LengthStainless steel or BlackIncludes roll pin. Made in USA..
Includes:• Firing Pin• Firing Pin Retaining Pin• Bolt Cam PinElectroless Nickel firing pin features ..
Ejector Kit Includes:Ejector
Ejector Roll Pin
Ejector SpringAll Made in the USA..
AR15 .556/223 Extractor Replacement KitKit Includes:- Extractor, Billet Steel, Machined to Mil-spec,..
Mil-Spec A2 Flash Suppressor Weight ~ 2ozMade in USA.Crush washer sold separately...
Kit includes:(1) Slip Ring, Delta(1) C-Clip, Retaining, Slip Ring, Delta(1) Spring, Delta Slip Ring(..
Precision machined from 4140 HT ordnance grade steel with Choice of: mil-spec
manganese phosphate ..
Includes:• Delta Ring• Snap Ring• Weld Spring100% Made in USA...
For AR-10 and other 7.62 (5/8 x 24) rifles which require a crush washer.Made in USA ..
4 Vent Muzzle Brake with Wrench Flats, 5/8 x 24 ID ThreadPrecision machined from 4140 ordnance..
Gas Key for AR15/M16 Bolt Carrier, Black NitrideIncludes fasteners and Hex ToolMil-Spec dimensionsMa..
AR15 Extended Tactical Charging Handle LatchIncludes 1 spring & 2 pinsAll Made in the USA..
Kit Includes:5-coil extractor spring Plunger/InsertO-RingMade in USA..
Kit Includes:1 Sight Tool, Knurled1 Front Sight Post, 1.81 Front Sight Spring1 Front Sight DetentThe..
Choose Mag Phosphate, Black Oxide or NiCoTef Coating• Mag Phosphate is a mil-spec finish and h..
5.56 2.23 Crush WasherStainless Steel, Black Oxide FinishMade in USA..
Made in USA..
Precision machined from S7 tool steel. Properly heat treated with manganese phosphate protective fin..
AR15 Firing PinElectroless Nickel (EN) enhances reliability and corrosion resistance while maintaini..
AR-15 Firing PinChrome plated, per Milspec Made in USA..
Carbine Handguard AssemblyRound XM177 includes heat shielding. Made in USA. ..
Made in USA...
The Damage Industries Sight Tool is all steel steel construction and
made proudly in the USA.Adjus..
Mil-spec, made in USA..
Extractor Spring w/Plunger Insert, .223/5.56Mil-spec, made in USA..
Mil-spec Chrome silicon steel, made in USA..
Kit Includes:1 Front Sight Post, 1.81 Front Sight Spring1 Front Sight DetentMade in USA...
Precision machined in Indiana, USA from steel billet with
MIL-DTL-16232 Manganese Phosphate or Bla..
This Low Profile Gas Block secures via two high retention stainless
steel set screws from below 3/..
Precision machined from steel billet with
MIL-DTL-16232 Black Oxide protective finish.
Precision machined in Indiana, USA from steel billet. Features a receiver-height MIL-STD 1913 Rail f..
Upper Assembly Parts Kit Includes:• Complete Forward Assist Assembly with Pin• Complete Ejection Por..
C-clip Retaining RingsBlack PhosphateMade in USA...
Works for BOTH our AK & AR short barrel muzzle devices!Precision machined in the USA from 4140 s..
Ejection Port Cover Door Assembly, AR15/M4/M16 Mil SpecMade in USA..
Patterned after the A2 style with slightly longer length, wrench flats, and increased durability and..
In Production - coming soonThis sleek, modular design allows for two length
Constructed of 6061 Aluminum with Mil-Spec hardcoat anodize.
Non-protruding clamp held with stainl..
This variant of our
Grenade-Styled forward grip is longer than our previous model, with
Kit Includes:Ejector SpringEjector PinForward Assist SpringForward Assist PinForward Assist Pawl Spr..
Precision machined in the USA from 4140 Steel with manganese
phosphate or black magnetite protecti..
Precision machined in the USA from 4140 Steel with a black magnetite protective coating. This muzzle..
AR15, M4, M16 Compatible Barrel NutPrecision machined to Mil-Spec DimensionsChoose from Manganese Ph..
Mil-SpecChemical ResistantMade in USA...
Mil-Spec Made in USA...
Forward Assist Spring Pin, BlackMade in USA...
Made in USA for .750" barrels...
Made in USA for .625" barrels...
ECS Rail Covers* Snap-on, snap-off installation/removal yet incredibly secure mounting* Sure-grip te..
5 Coil Extractor SpringMade in USA...
Standard power extractor spring with mil-spec copper plating. Made in USA..
Standard .750 Low Profile Gas Block Cone Point Set Screws10-32 x 3/16" 18-8 Stainless Steel, B..
Precision machined from 4140 HT ordnance grade steel with black oxide protective finish. Made in USA..
4 Vent Muzzle Brake with Wrench Flats, 1/2 x 28 ID ThreadPrecision machined from 4140 ordnance..